Sienna Maker Jacket Paper Pettern by Closet Core

Description

Sienna is a chic utility jacket inspired by vintage French workwear. Designed for hard-wearing use by makers and artists, it functions as both stylish outerwear and a highly practical layer for use inside the studio.

With a slightly dropped shoulder, Sienna features a crisp notched collar which can be worn buttoned at the neck with an optional snap button. It is unlined and finished with durable seams. Views A & B feature deep hip pockets, a hidden breast pocket and waist-cinching belt with D ring closure that can be worn closed, or open by looping the belt in the opposite direction; View A hits at mid-thigh and View B ends at upper thigh. View C is a short chore jacket with button closure, optional sleeve pockets and a back button placket.

SUGGESTED FABRIC

Durable woven fabrics like denim, twill, canvas and heavyweight linen.

YARDAGE REQUIREMENTS (45″/1.14M FABRIC)

View A (Full length jacket)
0-8 = 3.75yd / 3.5m, 10-14 = 4 yd / 3.75m, 16-20 = 4.5yd / 4.1m

View B (Mid length jacket)
0-8 = 3.5yd / 3.2m, 10-14= 3.75yd / 3.5m, 16-20 = 4 yd / 3.75m

View C (Cropped jacket)
0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 2.75m, 16-20 = 3.25yd/3m

YARDAGE REQUIREMENTS (58″/1.5M FABRIC)

View A (Full length jacket)
0-8 = 3yd / 2.75m, 10-14 = 3yd / 3m, 16-20 = 2.5yd / 3.2m

View B (Mid length jacket)
0-8 = 2.75yd / 2.5m, 10-14 = 3yd / 3.75m, 16-20 = 3.25 yd / 3m

View C (Cropped jacket)
0-8 = 2yd / 1.85m, 10-14 = 2.25yd / 2m, 16-20 = 2.5yd / 2m

ADDITIONAL SUPPLIES

• Lightweight non-stretch fusible interfacing (View A = 1.25yd, View B = 1 yd, View C = .75yd)
• Pocket lining (View C = .25yd)
• Polyester thread (Topstitching thread optional)
• View A & B only: D rings or belt slider (1.5″ / 38mm)
• View C only: Buttons or snaps – 9 x 5/8″
• Point turner and/or presser for collar
• Marking tool
• Optional: One set of snap buttons for collar
• Optional: Bias tape for finishing seams
• Optional: 5″/13cm twill tape or ribbon for hanging hook loop

Additional information