FLEX Silicone Hemmer by Jenerates

Description

Use the holes to mark the position of the hemmer with a chalk pencil or iron-on pen

– The cm version, the holes are at 1cm and 2cm, and the hemmer is 3cm wide.
– In the inch version, the hemmer is 1″ wide and the holes are 1/4″ and 5/8″ from one side, which means they’re 3/8″ and 3/4″ from the other side.

Pin through the holes to keep it in place while you press. Jen Hogg recommends a felt mat, but you can pin it to your ironing board.

You can also use the FLEX hemmer on straight edges. When pinning, add a little tension to inhibit the curve.

The FLEX is heat resistant up to 230°C, doesn’t buckle under steam, and stays cool. It’s designed to be both functional and strong. Firm enough to give you a solid edge to press against but not so thick that it creates a step in the fabric, the FLEX is tough, too. It has been stretched to almost double its length in tests without any issues, but please don’t try that at home! Store it flat or loosely folded when you’re not using it.

Overall size: metric 300x30mm, inch 11.8″ x 1″. Made in Scotland in small batches, supporting local businesses.